Evaporator Scale Inhibitor and Dispersant

Evaporator Scale Inhibitor Dispersant

I. Performance and Applications

EZF-903 Evaporator Scale Inhibitor Dispersant is composed of dendritic macromolecular polymers, dispersants, and other components. It is specifically developed for evaporators to handle water with high hardness, high alkalinity, and high sulfate content. Through mechanisms such as threshold effect and lattice distortion, it prevents scaling of inorganic salt ions like calcium carbonate and calcium sulfate. This evaporator scale inhibitor is widely used in complex water systems such as wastewater concentration and seawater desalination. It helps maintain the normal operation of equipment like MVR, MED, and MSF, reduces shutdown maintenance frequency, improves production efficiency, and extends equipment service life.

II. Technical Specifications

Item Specification

Appearance                                  Uniform liquid without precipitation or stratification

pH                                   1.0-12.0

Density (20°C g/cm³)            1.10

III. Usage Instructions

Add the evaporator scale inhibitor dispersant to a plastic dosing barrel (or tank), or dilute it with water. Use a metering pump to continuously add the chemical at the front end of the evaporator equipment. The dosage is based on wastewater flow rate, typically 50-200 mg/L. The specific amount of evaporator scale inhibitor should be determined according to water quality conditions.

IV. Packaging and Storage

※ Typically packaged in plastic drums, 25 kg/drum or as per customer requirements: